Roll – Bed Press

H Frame

Capacity: 80-200 Ton

• The original, patented Roll-Bed design. Bed rolls out for easy loading and unloading with a crane or other lifting device.
• Movable work head glides easily side to-side for full off-center load capacity across width of upper frame.
• “Daylight” is 1283 x 1524mm for 80- and 100-ton models; 1302 x 1625mm on 150- and 200-ton presses.
• Fast approach of double-acting, 334mm stroke cylinder is provided by electric/hydraulic pump with remote control hand switch. Operator can view work from all sides with fingertip control of cylinder piston travel.

PRESS FEATURES:

• Roll-Bed design – Bed glides in or out on bearings to make loading and unloading fast and easy.
• Adjustable lower bed width – For secure balancing and centering of heavy jobs. Loosen adjusting bolts to adjust bed from 102mm to more than 686mm. See dimension “H.”
• Movable work head – For off-center pressing jobs, work head moves on bearings across upper bolster. Presses can be used at full capacity, regardless of where work head is placed.
• Lifting mechanism – Simply turn crank handle to raise or lower upper bolster. Screw mechanism raises or lowers both sides evenly (a heavy duty 1 / 2 ” drill motor can replace handle for automatic adjustment). Four locking pins hold bolster in place for pressing.

Optional heavy-duty straightening fixtures – Make straightening jobs easy and accurate to within .0.1mm! Rollers are ball bearing mounted and handle raises or lowers for easy turning of the work. PUMP ELECTRICAL SPECIFICATIONS APE Series – 3 hp, 460 volt, 60 cycles, three phase. Available in 220/380 volt, 50 cycle, NOTE: To order press with a 230 volt, 60 cycles, single phase pump, order press less APE30. Order pump No. APE40 separately.